Stone veneer installation in Hesperia CA - stone set right on a wall that's ready for it
Tired of a plain or worn wall? We check the wall behind it first, then set stone veneer the way the maker's guide says.
What goes into putting stone veneer on a wall?
At D&L Hesperia Concrete and Masonry, stone veneer installation in Hesperia, CA means setting manufactured stone, a lightweight product cast from cement and aggregates to look like real stone, on a wall that's sound enough to hold it. The stone is a finish and carries no structural load, so the wall behind it still does the work.
Most people call because a front wall, a porch column or a fireplace surround looks plain or tired and they want the look of stone on it. The price moves with the size of the wall, how much prep the wall behind it needs, and how many corners, openings and cuts the stone has to work around. The schedule mostly turns on that prep, any permit and the weather, and the on-site estimate gives you a written scope for your wall.
How we handle stone veneer installation
Before any stone goes up, I check the wall behind it, because the stone is only as good as what it's stuck to, and if that wall is worn or damaged we fix it first. Then we follow the stone maker's install guide step by step, from the moisture layers and lath to the scratch coat, the base coat of mortar the stone sets into, because most veneer trouble comes from how it's put on and not from the stone. We set each piece, fill and tool the joints, and wet cut anything that needs trimming so the dust stays down around your house, then clean up when the wall is done.
When the wall behind needs more than a patch, that's work we do too. A cracked or unfinished block wall can be repaired or rebuilt through our concrete block walls work before it gets stone, and if you're starting from the footing up, our foundation block wall installation gives the veneer a solid base from the start.
Stone veneer and wall prep in Hesperia
Hesperia issues building permits, and they're required before construction or remodeling starts, but the city's list names work like patio covers, garages and room additions, not stone veneer. That leaves it open whether your job needs one, so before we start I check with the city or county building office that covers your address, and when a permit is needed we apply for it as your licensed contractor. If you want to ask yourself, Hesperia's permit center is the place.
The city's residential design criteria list Seismic Design Category D0, the earthquake rating used in home design, and rate weathering as negligible with no frost line depth to design for. So shaking is what we plan around here, not freezing, which is one more reason I want the wall behind the stone solid and tied together before we cover it up. We're based in Hesperia and work across the High Desert cities around it, and on jobs in Victorville and Apple Valley we mostly put stone over stucco and block on entries, porch columns and low front walls.
How a veneer job goes
Call or send a request
Call (760) 983-7937 or send the form, and we'll set a time that works for you. We answer every day from 8 AM to 9 PM, so an evening or weekend call is fine.
I look at the wall
I come out to look at the job, measure the wall and take photos. That's when I can see how much prep the wall needs before any stone goes on.
Get a written estimate
I tell you plainly what I'd do and what I wouldn't, then you get a written estimate with the scope spelled out. You'll see what the price covers, prep included, before you decide anything.
We build it and walk it
We sort out any permit with the right office before we start, then build it. When the stone is up, we walk the finished wall with you.
Get a written estimate for stone veneer and wall prep in Hesperia
Send the form and we'll reply within one business day to set a time for me to come out. The estimate is free and done at your house, and there's no obligation to go ahead.
What homeowners ask about stone veneer installation
Can stone veneer go over my existing wall?
It can if the wall is sound. Industry guidance says manufactured stone should go only over sound walls, not over deteriorating backing or over exterior insulation and finishing systems, the foam board with a stucco-like coat some houses have. If your wall is worn or damaged, plan on fixing it before the stone goes on.
How much does stone veneer installation cost in Hesperia?
Installing stone veneer in the Riverside-San Bernardino area usually costs about $2,700 to $10,700 per job. That's the going rate for the whole job around here, not our price. Your written estimate gives you the number for your wall.
What causes most stone veneer problems?
When manufactured stone underperforms, the workmanship in the field is usually the cause, not the stone. Work done to recommended practices helps the system perform as intended for decades, so the way a crew puts it on matters as much as the stone you pick.
Who can get the building permit in Hesperia?
In Hesperia, only the property owner or the owner's licensed contractor or authorized agent can get a building permit. If your job needs one, either you pull it or the contractor working for you does, which is how we handle it.
How do I plan a stone veneer job in hot weather?
Ask the crew how they'll handle the heat, because the mortar needs help when it's hot. Industry guidance says that above 90°F during installation, the scratch coat and the backs of the stones may need extra water, and the wall may need shade or frequent misting. It's a fair question for anyone bidding your job, us included.
What goes behind stone veneer on a framed wall?
On a framed exterior wall with metal lath and a scratch coat, one stone maker's guide says industry guidance calls for two separate layers of water-resistive barrier behind the stone. Those layers overlap like shingles and tie into the flashing around windows and doors, though approved cement-board systems may differ.
Why Hesperia homeowners call D&L Hesperia Concrete and Masonry for stone veneer
The owner writes your estimate
I come out to look at the job and write the estimate myself, and I'm on the job with our crew while the work gets done. You talk to the person doing the work, so what we agreed on is what gets built.
Doing masonry full time since 2017
I started fixing block walls and patching brick for neighbors on weekends, then got licensed and went full time in 2017, so we've been at it 9 years. Block walls are what we're best known for, and a lot of veneer goes on exactly that kind of wall.
Licensed in California and insured
We're licensed and insured. In California, someone without a license is limited to minor work up to $1,000, and only when the job needs no permit and they employ no one on it.
Straight talk about the hidden prep
I care most about the parts you can't see, like the wall behind the stone and what's in the joints. Doing that right can cost a bit more up front, and I'd rather tell you that now than come back to patch the same wall later.
If you've got a wall you want in stone, send us a request or call (760) 983-7937 and I'll come out and look at it.
Other work that goes with stone veneer
Concrete block walls
If your yard or front wall is block that's cracked, leaning or unfinished, we can repair or build it so it's ready to take stone.
Foundation block wall installation
Planning an addition or a new low wall? A block foundation wall built on a proper footing gives any stone finish a solid, square base underneath.
Get your wall and stone veneer looked at
Have the wall's rough size, what it's covered with now and any damage you've noticed handy when you call (760) 983-7937 or send the form, so the visit goes quicker.
